IBM Books

Event Logging System Messages Guide


Virtual Router Redundancy Protocol (VRRP)

This chapter describes Virtual Router Redundancy Protocol (VRRP) messages. For information on message content and how to use the message, refer to the Introduction.

VRRP.001 

Level: C-INFO

Short Syntax: VRRP.001 VRID Interface_address/ vrid init success net network_number ifc network_name_number/

Long Syntax: VRRP.001 VRID Interface_address/ vrid initialization successful for net network_number and interface network_name_number/ .

Description: A VRID (Virtual Router) was successfully initialized. This VRID will participate in the VRRP protocol.

VRRP.002 

Level: UE-ERROR

Short Syntax: VRRP.002 VRID Interface_address/ vrid init failed: reason_code

Long Syntax: VRRP.002 VRID Interface_address/ vrid initialization failed due to reason_code.

Description: A VRID (Virtual Router) was not initialized. The reason code indicates the type of failure: 1 - Interface IP address not found. 2 - Net for IP address not found. 3 - Net for IP address not supported. 4 - Unsupported token ring functional address. 5 - Memory error allocating VRID control block. 6 - VRID would not have any virtual addresses. 7 - Multicast VRID on Bridge net not allowed.

VRRP.003 

Level: C-INFO

Short Syntax: VRRP.003 Net network_number ifc network_name_number/ source_mac destination_mac-> protocol proto

Long Syntax: VRRP.003 Net network_number interface network_name_number/ source_mac MAC level send destination_mac-> protocol protocol successful.

Description: The MAC level frame was sent on the interface using the network n_fsend function.

VRRP.004 

Level: UE-ERROR

Short Syntax: VRRP.004 Net network_number ifc network_name_number/ source_mac destination_mac-> protocol proto reason_code failed:

Long Syntax: VRRP.004 Net network_number interface network_name_number/ source_mac MAC level send destination_mac-> protocol protocol reason_code failed due to .

Description: The MAC level frame send failed. The reason indicates the origin of the failure. Others - n_fsend() return code 254 - Link layer header allocation failure.

VRRP.005 

Level: C-INFO

Short Syntax: VRRP.005 VRID Interface_address/ vrid adv net interface_name ifc network_number/ network_name_number

Long Syntax: VRRP.005 VRID Interface_address/ vrid advertisement sent on net interface_name interface network_number/ network_name_number.

Description: The VRID advertisement was sent on the interface.

VRRP.006 

Level: UE-ERROR

Short Syntax: VRRP.006 VRID Interface_address/ vrid adv net interface_name ifc network_number/ network_name_name failed:

Long Syntax: VRRP.006 VRID Interface_address/ vrid advertisement on net interface_name interface network_number/ network_name_name failed due to reason .

Description: The VRID advertisement was not sent on the interface due to reason: 1 - I/O buffer allocation failure 2 - vrrp_mac_send() failure.

VRRP.007 

Level: C-INFO

Short Syntax: VRRP.007 VRID Interface_address/ vrid state old_state_name-> new_state_name: event_name

Long Syntax: VRRP.007 VRID Interface_address/ vrid state change from old_state_name to new_state_name due to event event_name.

Description: The VRID went through a state transistion.

VRRP.008 

Level: C-INFO

Short Syntax: VRRP.008 VRID Interface_address/ vrid adv rcv src source_ip net interface_name ifc network_number/ network_name_number

Long Syntax: VRRP.008 VRID Interface_address/ vrid advertisement received on from source_ip on net interface_name interface network_number/ network_name_number.

Description: The VRID advertisement was received from the sender on the interface.

VRRP.009 

Level: UE-ERROR

Short Syntax: VRRP.009 VRID Interface_address/ vrid adv rej src source_ip net interface_name ifc network_number/ network_name_number: reason_code

Long Syntax: VRRP.009 VRID Interface_address/ vrid advertisement received on from source_ip on net interface_name interface network_number/ network_name_number due to reason reason_code.

Description: The VRID advertisement was rejected due to the specified reason. Reason codes include: 1 - Bad IP TTL 2 - Bad IP Length 3 - Bad VRRP Version/Type 4 - Received on wrong Net 5 - Bad checksum 6 - Authentication error

VRRP.010 

Level: C-INFO

Short Syntax: VRRP.010 VRID Interface_address/ vrid adv src source_ip net vrid_interval ifc received_interval/ int mm vs

Long Syntax: VRRP.010 VRID Interface_address/ vrid advertisement received from source_ip net vrid_interval interface received_interval/ has interval mismatch versus .

Description: The received VRID advertisement had an advertisement interval different than the configured VRID advertisement. Nevertheless, it was accepted.

VRRP.011 

Level: C-INFO

Short Syntax: VRRP.011 VRID Interface_address/ vrid adv src source_ip net ifc / addr mm

Long Syntax: VRRP.011 VRID Interface_address/ vrid advertisement received on from source_ip net interface / had address list mismatch.

Description: The received VRID advertisement had an address list different from the configured VRID address list. Nevertheless, it was accepted.

VRRP.012 

Level: UI-ERROR

Short Syntax: VRRP.012 Dup VR addr ip_address in VRIDs interface_address/ vrid and interface_address/ vrid

Long Syntax: VRRP.012 Duplicate Virtual Router IP address ip_address in VRIDs interface_address/ vrid and interface_address/ vrid.

Description: The specified Virtual Router IP address is configured in multiple VRIDs or multiple times in a single VRID.

Action: Delete all but one instance of the specified Virtual Router IP address.


[ Top of Page | Previous Page | Next Page | Table of Contents ]